SUITS: U/EX SERIES 165
Manufactured 2000 - 2004.
Priced per set (4)
Filter pads clean out the air being circulated for maximum efficiency and add water to the air of your Evaporative Air Conditioner unit to cool it. When filter pads become worn out your Evaporator unit will need to work harder to cool the air or won’t work at all.
Don’t be tempted by the cheap and nasty imported filter pads that are out there.
Only genuine CoolBreeze Coolcel filter pads have the vital water distribution channels fitted.
Without these water distribution channels, the filters will not achieve maximum saturation and the cooling performance of the unit will be compromised.
Coolbreeze ECOPADS offer the next generation in Filter Pads.
ECOPADS are exclusive to Coolbreeze and are a high efficiency cooling media.
- No Odour
- Formaldehyde Free
- No harmful glues or chemicals
- Greater Saturation
- Up to 9% Increased cooling efficiency compared to standard filter pads
- Fresh Clean Air - Safer alternative to you and your family
- Better for the environment.
Installation and Maintenance Tips
New filter pads may have an unpleasant odour when first installed. To reduce this odour and prevent it from entering the air-conditioned rooms, it is recommended to flush clean water through the pads for 5 mins by filling the tank, running the water pump and then fully draining the tank prior to use. Use the 'Pad Flush' option where available, or run in cooling mode on lowest fan speed to do this. New pads may also take several hours to fully wet out when first used.
To maximise the life of your new filter pads ensure your cooler salinity management or bleed system is functioning correctly to prevent excessive salt build-up in the pads.
It is also recommended to gently rinse your filter pads with water annually to clean the pads and remove any dust build-up.
Unsure if these are the correct filter pads for you or if your filter pads need changing? Click here for some helpful information